PVC Card Printer

How to Clean Evolis Printer? Use Cleaning Card/Swab Pvc Card Printer Buy @ abhishekid.com

How20to20Clean20Evolis20Printer3F20Use20Cleaning20Card2FSwab20Pvc20Card20Printer2020Buy204020abhishekid.com

How to Clean Evolis Printer? Use Cleaning Card/Swab Pvc Card Printer Buy @ abhishekid.com

Short Description​

Buy Swab -https://abhsk.com/12g  |  Evolis Primacy & Zenius or  any other models Cleaning Kit
Evolis cleaning cards feature a  low-tack adhesive that cleans dust and other debris from your Evolis Zenius  or Primacy printer’s card rollers to help avoid damage to your printhead and  help ensure the quality of your printed cards. Simply run the cleaning cards  through your printer to clean the rollers.
Recommended UseDirt  Remover Application/UsagePrinter

Timestamp


00:00  intro
00:22 cleaning swab
00:30 removing the  ribbon
01:05 cleaning the roller
02:01 cleaning the inner  roller
02:55 conclusion

Transcript

How to clean the head of  the
Evolis Primacy printer, how to

clean rubber  rollers?

And how to clean the  cleaners’
roll?

Today we will tell you about this
video.

First  of all, the printer will
be turned off.

Then  remove the power cable
from the back.

then remove  the ribbon from the
front

This is the cleaning  swap and
these are this is its sponge

and this is  the head of the
printer.

When you press it  slowly, the
the liquid will come here and we

have  to apply that liquid on
the head so that when you  rub

it slowly, whatever dirt it has,
dust or  small ribbon particles,

then they will be attached  to
this sponge.

Your head will be clean,  print
will come dark

First turn on the  printer

After that, open the panel and
remove the  ribbon

And then take your cleaning
swap and clean  these rolls.

To do cleaning, we will press
and  hold this button, due to

which these rollers will  start
running non-stop, then we will

press our  cleaning stick
lightly, so that we will slow

the  cleaning of the roller.

Or any soil or any other  dust
particles will be cleaned by

your  roller.

Here the second roll is hidden
inside the  printer, so you will

flip it like this and press  it
down again here

like that, there is four  roller
inside the printer 1, 2, 3 and

will press  the button and clean

the rollers.

the  sixth roller is hidden
inside here, it is  called

cleaning roller, in the next
video, then  open the lid from

the back and remove the  ribbon,
turn this big fall on the

inside first  and then you will
see this our cleaning  roller

here.

When you press the liver  in
this way, its lock mechanism

will open and now  you can
remove this roller.

There is a lot of  dust stored
inside it, now how to remove it?

For  this, first of all, you
will take normal  silicon

transparent tape, not a brown
tape, take  only transparent

tape and rotate it in such a
way  that whatever dust

particles are inside it,  there
are pieces of ribbon, there are

some small  particles of PVC,
they all come out of your  rubber.

You have to use only and only
transparent  tap and if you use

brown tape then you will buy  a
new roller because it will be

completely  damaged.

Rotating such a circle for at
At least a  minute will bring such

finishing and cleanliness  in
this way similarly pushes the

roller inside by  pushing the
back of the lock mechanism here

and  turn the printer off and
turn it on once.

Do it  if your printer is ready

I am Abhishek with  Abhishek
products and this is our

showroom You  can visit our
showroom to get information

about  more such products or
subscribe to our  YouTube

channel and get updates on  more
products.

If you want to order from  us,
you can visit our website  www.

abhishekid.com

or you will find a  link inside
the comments below so that you

can  connect us through WhatsApp.

We have all these  machines
material and technical

expertise  available for you

Check Out Some Of Our Other Products

Leave a Reply