Gold foil printing is a very simple method where we take printout from a laser jet printer and put gold foil roll on it into lamination machine all the printed toner converted into gold colour when it goes into the lamination machine
First, we place the printed paper upwards
Then we place the gold foil
The gold foil is also placed facing upwards
Then we place a white paper
over the gold foil
Just for protection
Then keep the three pieces of paper evenly
like a sandwich
Then we insert this paper into
the Lamination Machine
Keep the temperature of the Lamination
machine to 180 degree
set the switch to hot
forward mode and power switch
to on position
This machine can deliver high
temperature as it is a SNNKEN lamination machine
It has the four rollers inside
so that good pressure is given to
the paper which gives good finishing
We recommend the SNNKEN machine for the customer
So that you will get a good, gold foil finish
and the quality is very good
As the gold foil is stuck nicely in the paper
we are removing the gold foil slowly
It has the best quality output, Super quality
we have printed a 1 mm line which is also
shinny well in golden colour
You can print any type of designs
We have used 100 gsm paper on which kept the gold foil paper and
the temperature of the lamination was 180 degrees Celsius
The machine used was a Snneken A3 size
the quality is in front of you
the paper was not affected where there was black
colour toner is converted into golden colour
When you are doing any projects gold colour is
the more popular light gold colour is more popular
or when you are doing any another job we have
pink, silver, red, blue and green colours are also available
we deliver this on the order basis
Gold foil lamination is common.
Gold foil paper is a separate paper
we can use black colour paper for printing
anything prints with a laserjet printer
use HP printer or Canon printer LDP2900 HP's 1005 series
printer or M series printer
use only laserjet printer only
don't use an inkjet printer
you can use a large photocopier machine
instead of a laser printer
please note only one thing the printer or
photocopier must be a high-quality machine
and its drum, blade, and cartridge all must be new when
your print is of good quality the result will be good
this print was taken with the new machine the drum the blade
was new you can see the print quality
now we are going to print in the black
colour paper to give you an idea of how the result
when printed on the black paper
the black colour can be seen here and there
now we are going make the black colour in
black paper to gold colour
we are keeping the black paper + gold
foil paper + white paper like a sandwich
then insert into the lamination machine, temperature of the machine
is 180 degrees and the high pressure is done by the machine
we are keeping the white paper so that
lamination machine is not damaged
or any print is left for this purpose
we are using the 100gsm white paper
to protect the machine
this process is the same for all colours
only the foil roll colours changes
if you want to order this foil roll go
to www.abhishekid.com
or you can contact me on WhatsApp
the number is given below
for bulk orders use the WhatsApp number
given below the description
for fewer orders, you must order through
website only
the complementary result coming on
the black paper is fine, No.1 quality
but we see some black colour
dots on the left and right
this is because we used old
photocopier machine for printing
were this print was taken from a new printer
here we can see no dots in the paper
here we see golden colour dots,
which were black colour dots on the paper
because of the old printer, this
print is like this
when we use a new printer the result
very good
There are no black dots when
taken with a new printer
There are no black dots in it
this is the difference between the two
These are the major facts that affect the printing
gold foil are same but the machine differs and quality
differs we must use laserjet printer
if it has a new cartridge it good better output and better result
Now we talk about the Snnken lamination machine
as the temperature is set at a high 180 degree
now our job is finished and we are
going to turn off the machine
don't off the machine from the plug point
or on/off switch on the machine first
turn the temperature knob to zero
then put the hot switch to cold,
keep like this for 2 or 5 minutes
at this time it will consume
some electricity
but this process gives long life to your
machine and machine does not trouble
keeping like this maintains
the life of the machine and gives long life
This is a shot presentation
how to do gold foil printing
or how to do golden print on paper
you can use any type of paper
you can also use 300 gsm paper
when you use 300 gsm paper
the result will be the same
if you want to know the details for like this
products please subscribe to our Youtube channel
where you can get details about lots of
machine and demo regularly
if you want to visit our showroom you can
visit our showroom
which is in Hyderabad, the address is
given in the description
and thank you for watching the video
and if you have any technical doubts still
you can comment in the comment box below