Center-Feed Inkjet Printable Cards — 350 Micron Lamination on AP Film | AbhishekID

Center-Feed Inkjet Printable Card Blanks — AP Film + 350 Micron Lamination

Center-feed inkjet printable card blanks on AP film with a 350 micron lamination finish path for stiff, sealed ID cards. Blanks arrive in a pre-cut center-feed shape — no die cutter for the outline. Choose Pack Of 100 through 1000 for schools, offices, and print shops using Epson, Canon, or HP center-feed inkjet trays.

Realistic shop workflow — print → hot lamination → trim → deliver

1. Step 1 — Print: Load the blank on the center-feed / rigid media path. Print school or company artwork (photo, barcode, department text) on the AP film surface using your inkjet driver settings — setup guide emailed after purchase.
2. Step 2 — Hot lamination: Pass the printed blank through hot lamination rated for 350 micron pouches or card lamination so the card seals waterproof and colour stays protected.
3. Step 3 — Cut the feed tab: Only after print and lamination, trim the protruding ~1.5 cm center-feed tab with scissors or a trimmer along the edge.
4. Step 4 — Delivery: Check edges and lamination bond, then hand the finished CR80-class card to the student, employee, or visitor — with sleeve or lanyard as needed.

Use case — School ID cards

• Student photo IDs — class, roll number, session year
• Staff and faculty badges — campus entry and library access
• Transport and exam hall passes — term-start batch printing
• Typical flow: print → hot laminate for daily wear → trim feed tab → issue on orientation day

Use case — Company ID cards

• Employee access cards — logo, department, employee ID
• Visitor and contractor badges — reception and security desks
• Membership or dealer IDs — field teams and partner networks
• Typical flow: HR artwork → center-feed print → hot laminate → trim tab → deliver at onboarding or security

Why print shops choose this over generic 80-card packs

• Pre-cut center-feed shape — skip die cutting; only trim the feed tab after finishing.
• Pack Of 100–1000 — volume ladder with lower per-card rate on larger packs (see price table on this page).
• 350 micron lamination workflow — matches heavy-duty pouch laminators print shops already own.
• AP film inkjet layer — glossy, printable surface for everyday ID production without a PVC card printer.
• ~5.5 g finished card weight class (typical after laminate + trim) — similar stiffness to standard laminated PVC IDs.

Before you print

• Inkjet only — not for laser printers.
• Driver margins — a thin unprinted border can remain on some models; test one card first.
• Tray compatibility — center-feed fit is model-specific; follow the post-purchase email guide.