Temperature Controller for 15x15 & 16x24 Heat Press | Digital Meter

Temperature Controller for 15x15 & 16x24 Sublimation Heat Press

The Temperature Controller for 15x15 and 16x24 Heat Press from AbhishekID is a precision digital temperature and timer meter — a drop-in spare for flat-bed 15×15 inch (38×38 cm) and 16×24 inch (40×60 cm) sublimation heat presses. When the factory controller drifts, fails, or needs replacement, this unit restores accurate heat and time control for t-shirts, fabrics, and flat substrates.

Key Features

• Digital LCD Display: Clear readout for temperature and press time so operators can monitor each cycle in real time.
• Up to 250°C (482°F): Suitable for polyester sublimation, heat-transfer vinyl, and most flat blanks used on 15x15 and 16x24 presses.
• Dual-Size Compatibility: Designed as a replacement meter/controller for both 15x15 and 16x24 sublimation heat press machines.
• 220V Indian Mains: Built for standard workshop power — verify wiring and amperage against your machine manual before install.
• Temperature + Time Control: Fine-tune heat and dwell time to avoid over-pressing or incomplete transfers.
• Commercial Spare SKU: Ideal for print shops, sublimation startups, and service centres stocking heat press spare parts.

What the Controller Does

In a sublimation heat press, the meter/controller is the main control unit. It lets you set and monitor temperature and press time — critical for transferring designs onto fabrics, tiles, and other heat-transfer materials. Precise settings improve print clarity, colour durability, and reduce wasted blanks.

How to Use / Install

1. Disconnect mains power completely before opening the control panel.
2. Photograph the existing wire mapping on the failed unit.
3. Swap the controller line-for-line, matching each terminal carefully.
4. Power on and run a low-temperature test cycle before production use.
5. Adjust temperature and time for each substrate (fabric vs thicker blanks).

Best For

• Owners of 15x15 or 16x24 flat sublimation heat presses needing a spare controller
• Print shops repairing drifted or dead digital meters
• Service centres stocking heat press spare parts alongside silicone beds and teflon sheets

Note: This listing is for the controller/meter spare only — not a complete heat press machine. For mug and 5-in-1 combo presses, use our separate mug/5-in-1 controller SKU.