Here because we are doing
lamination for limited

documents, so by not fitting
the roll, we are doing direct

pouch lamination here, you have
to use this method only if you

have to do the lamination of
limited quantity or just one or

two?

Quantity lamination has to be
done, here we are adjusting the

pressure

and setting our machine inside
forward mode

And by putting pressure on it
in this way by hand, you are

keeping its straight alignment

We have already given the
option of rolling inside this

machine.

Moving upwards and downwards is
why lamination is being done in

this way at this time.

So that

Our work is doing a small run,
we are doing a small job, it

should be done easily

And I can use it a little later,
if you have to do lamination of

different sizes or different
fitness, then you can also use

this method for that.

The special thing about this
the machine that here we have

given you an integrated
detailed panel and inside this

the panel you get speed control,
whether you can increase the

speed, decrease, the thickness
of your document or its quality?

According to the thickness or
length, as well as have

given the temperature control
here, forward control, backward

control and stop control are
also provided and when the

the machine is operating, you have
to select it in hot mode.

Its PCB model is a very
detailed model and here you get

a pressure knob where you can
decrease or increase the

pressure so that the roller is
up or down, forward or back, up

or down, the adjustment is
easily done with it.

At the same time, we have given
you inside this machine.

there is a full arrangement to do
roll-to-roll lamination in this

machine There is a rod on the
top and a rod of similar

pattern at the bottom, inside
which you can laminate 1-inch

core or 3-inch core lamination
easily, here you will put in 25

inch lamiantion roll

you will put one roll here also

And you will also put them on
the bottom and bring them from

bottom to top through a pattern
and will also bring them from

top to bottom through a pattern,
which we will definitely give

you the full demo of the machine.

We will also provide you with
full training, how to do the

lamination?

These roles have to be adjusted
here and if you have any kind

of drawings, projection posters,
some different photo frames of

God or you have any order of
lamination.

Or if you have a blueprint
lamination work, you can easily

do it inside this machine

The name of this machine is

FM650, I think this 650mm
length is around 27 inches and

mostly used in 25 inch
documents lamination

Very heavy duty and very strong
and steady machine and with this

machine we will give you the
best

we offer wheels base stand also
s

When you receive this machine,
you will have to assemble the

stand, but the machine will be
ready to use, you will get it

from its control at the back.

On the front, you will get this
switch of double side lamp

heating and your pressure
towards the right-hand side and

the output from this machine
looks something like this.

It is a very simple and
easy-to-use machine, whether

you use it for small runs or
for large runs

If you have a little technical
knowledge then you can easily

use this machine, it is a very
strong and steady machine and

its roller looks like this,
this roller is a four roller

the heating system inside this
machine.

There is a four-wheeler
feeding system, due to which

the work of this machine is
done easily with a lot of

quality and pressure sensitive
work, nowadays you must have

seen in the market that there
is a lot of trends going on.

satin lamination if you do that
too a little carefully, then

you can handle this machine
easily.

Drawing, Plloter, Projections

As well as all the documents of
AutoCAD

If you can, let's see a demo of
it now.

And now we have set the same
document upside down and then

laminated it from the other
side so that the starting part

which could not be laminated is
also laminated in it now.

This is a 27-inch machine roll
to roll machine

Heavy-duty model silicone
rubber with 4-roll lamination

inside and

This is a simple machine of
front feeding and bank loading

and if you have a house or
office facility with normal

single-face electricity, then
you can easily do the lamination

inside it. here we have done the
lamination of the projection

We have easily laminated it
here and it is very easy and

simple process, if you have a
lamination of one or two

documents in this way, then you
can cut the lamination roll and

set it in this way and inside
this machine.

Along with large machines to do
lamination, we will find you in

a small machine 13-inch or you
will get documents laminates,

rim cutter or labels, printers,
rims cutters and creasing

machines are also available.

We have more business products,
so that you can improve your

workflow.

We can improve business,
develop side businesses and

along with existing machinery,
we also have many inkjet media

and laser jet media so that you
can develop different types of

products whether it is a button
badges or metallic button

badgers.

Be it this kind or any corner
cutters or staplers or thermal

printers or ID cards tag
machines are also available, we

have many other products such
as wiro binding, and spiral binding.

cold lamination, paper cutters,
sublimation machines

wiro binding machines look
something like comb binding

machine, thermal binding machine

Value binding machines,
electric spiral binding

machines, electric wiro binding
machines, manuals spiral

binding machines, as well as
you can find sublimation ink,

paper, tape, sublimation roll,
sublimation stand, sublimation

heat press for ID card lanyard

And most importantly many types
of round cutters, cold

lamination machine from 14-inch
to 40 inches will be available

to us along with their supplies,
their roles as well as their

different variations.

If you ever visit Hyderabad or
you live in Hyderabad, you can

visit our store, see our
machines metal and if you find

these machines inside some EMI
facility.

We need that facility in our
facility of the bank, so that

the facility is also available with
us.

And one special thing about
this machine I forgot to

tell you is that it is such
a golden foil inside this

machine.

It gets done.

So if you want to contact us,
then you will find the link of

WhatsApp, WhatsApp is given below
inside the description and also

inside the paint comment.

Don't forget to subscribe to
see many more such demos

After lamination, it is also
very important to finish the

document, so for that you can
take normal scissors or take

our 24-inch rotary cutter and
cut it in a straight line in

such a way.

While purchasing the machine,
we also give a demo of at least

one to one and a half hours
separately so that you can

easily get all the technical
information, but for now I think.

You must have understood what
are the capabilities of this

machine and what can you do in
it?

In the next demo, we will see
how golden foil is made on

transparent paper inside this
machine.

And inside such wedding
invitations, wedding cards or

any corporate gift card, you
can do this kind of golden foil,

inside this machine, now I will
tell you some of the features

of this machine.

Inside this machine, you can do

of business, only with this one
machine, you can follow the

first inside the transparent paper,
which is very much used in the

wedding card industry.

You can also do different types
of files that are used in the

gifting branding and box
industry, you can do this kind

of instant spot lamination on
top of any of your colour prints

with this machine.

Fourth you can do the lamination for
drawing, AutoCAD and plotter,

fifth you can create such
golden button badges or

metallic foil button badges